Boss Ground Joint Spuds, 4 1/8 in, Plated Steel
- The spud part of the coupling serves as one half of the Boss Ground Joint connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud
- When connected they achieve both a mechanical and a pressure seal
- Leakproof and easy to seal
- Recommended for steam service up to 450°F
WARNINGSpecifications
UNSPSC Code
40141700
Weight
0.01lb
Body Material
Plated Steel
Brand
Dixon Valve
Category
Fitting Parts & Accessories
Connection Type
Male/Male
Length [Nom]
4 1/8 in
Male Thread
3 in
Manufacturer
Dixon Valve
Material
Plated Iron
Operating Temp. [Max]
450 °F
Thread - TPI or Pitch
3 in
Type
Connector
Used With
Boss Ground Joint Fitting; Hose
Width [Nom]
4 7/8 in
Wt.
0.01 lb
Compare
Boss Ground Joint Spuds, 4 1/8 in, Plated Steel
- The spud part of the coupling serves as one half of the Boss Ground Joint connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud
- When connected they achieve both a mechanical and a pressure seal
- Leakproof and easy to seal
- Recommended for steam service up to 450°F
WARNING