Boss Ground Joint Spuds, 2 7/16 in, Plated Steel
Item Code: 238-GB38
Category
Fitting Parts & Accessories
Manufacturer Dixon Valve
Minimum quantity 5
- The spud part of the coupling serves as one half of the Boss Ground Joint connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud
- When connected they achieve both a mechanical and a pressure seal
- Leakproof and easy to seal
- Recommended for steam service up to 450°F
WARNINGSpecifications
UNSPSC Code
40141700
Weight
5.26lb
Height
2.55in
Width
4.8in
Length
5.5in
Body Material
Plated Steel
Brand
Dixon Valve
Category
Fitting Parts & Accessories
Connection Type
Male/Female
Female Thread
3 in
Length [Nom]
2 7/16 in
Male Thread
4 in
Manufacturer
Dixon Valve
Material
Plated Iron
Operating Temp. [Max]
450 °F
Quantity
5 per pack
Thread - TPI or Pitch
3 in
Type
Connector
Used With
Boss Ground Joint Fitting; Hose
Width [Nom]
4 7/8 in
Wt.
0.01 lb
Compare
Boss Ground Joint Spuds, 2 7/16 in, Plated Steel
Item Code: 238-GB38
Category
Fitting Parts & Accessories
Manufacturer Dixon Valve
Minimum quantity 5
- The spud part of the coupling serves as one half of the Boss Ground Joint connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud
- When connected they achieve both a mechanical and a pressure seal
- Leakproof and easy to seal
- Recommended for steam service up to 450°F
WARNING