Tether-Ready Drive Deep Socket Sets, 3/8 in Drive, 12 Point, Inch
- Manufactured with four detent holes so that the pin detent will engage correctly regardless of the direction the socket is placed on the square drive
- The positive control system requires a separate tool to attach or remove the socket, meaning it cannot be removed without specific intent
- Chrome finish is applied after the holes are bored for better corrosion resistance
- Ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials
- The TorquePlus design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
Specifications
Weight
3.48lb
Height
2in
Width
4.1in
Length
13.4in
Brand
Proto
Category
Socket Sets
Drive Size [Nom]
3/8 In
Drive Type
Square
Finish
Full Polish
Includes
J2586 Socket Bar 13 in; J2591 Socket Clip 3/8 in Drive; J5008-TT Socket 3/8 in Drive 1/4 in 12Â Point Deep; J5010-TT Socket 3/8 in Drive 5/16 in 12Â Point Deep; J5012-TT Socket 3/8 in Drive 3/8 in 12Â Point Deep; J5014-TT Socket 3/8 in Drive 7/16 in 12Â Point
Language
English
Locking Type
Pin
Material
Alloy Steel
Measuring System
Inch
No. of Points
12
Opening Size [Nom]
1 in; 1/2 in; 1/4 in; 11/16 in; 13/16 in; 15/16 in; 3/4 in; 3/8 in; 5/16 in; 5/8 in; 7/16 in; 7/8 in; 9/16 in
Tip Size [Nom]
1 in; 1/2 in; 1/4 in; 11/16 in; 13/16 in; 15/16 in; 3/4 in; 3/8 in; 5/16 in; 5/8 in; 7/16 in; 7/8 in; 9/16 in
Tip Type
Hex
Type
Socket Set
Wt.
3.64 lb
Compare
Tether-Ready Drive Deep Socket Sets, 3/8 in Drive, 12 Point, Inch
- Manufactured with four detent holes so that the pin detent will engage correctly regardless of the direction the socket is placed on the square drive
- The positive control system requires a separate tool to attach or remove the socket, meaning it cannot be removed without specific intent
- Chrome finish is applied after the holes are bored for better corrosion resistance
- Ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials
- The TorquePlus design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage