Irwin

SDS-plus Standard Tips, 21 1/2 in, 5/8 in Dia.

Category Rotary Hammers
SDS-plus Standard Tips, 21 1/2 in, 5/8 in Dia.
Irwin

SDS-plus Standard Tips, 21 1/2 in, 5/8 in Dia.

Item Code: 585-322044
Category Rotary Hammers
Manufacturer Stanley Products
  • Fits all SDS-plus and Hilti TE-C rotary hammers
  • Reduced area above the flute prevents the drill bit from binding while drilling--the full usable length can be utilized
  • Chrome vanadium shaft through-hardened to 50-53HrC
  • Patented tip and flute design removes dust more efficiently, up to 25% faster than other bits
  • Shot-peened, double-tempered finish reduces breakage
  • Hot isostatically pressed to extend life and resist breakage
warning sign WARNING
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:<br/> * lead from lead-based paints,<br/> * crystalline silica from bricks and cement and other masonry products, and<br/> * arsenic and chromium from chemically-treated lumber.<br/> Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Specifications

UNSPSC Code

27112700

Weight

0.73lb

Height

0.8in

Width

1in

Length

22in

Bit Length

16 in

Brand

Irwin

Category

Rotary Hammers

Cutting Diam [Nom]

5/8 in

Dia. [Nom]

5/8 in

Finish

Chrome

Flute Length

16 in

Height [Nom]

0.758 in

Length [Nom]

21 1/2 in

Overall Length [Nom]

18 in

Type

Drill Bit

Width [Nom]

1 1/2 in

Add to quick list
Compare
Irwin

SDS-plus Standard Tips, 21 1/2 in, 5/8 in Dia.

Category Rotary Hammers
SDS-plus Standard Tips, 21 1/2 in, 5/8 in Dia.
Irwin

SDS-plus Standard Tips, 21 1/2 in, 5/8 in Dia.

Item Code: 585-322044
Category Rotary Hammers
Manufacturer Stanley Products
  • Fits all SDS-plus and Hilti TE-C rotary hammers
  • Reduced area above the flute prevents the drill bit from binding while drilling--the full usable length can be utilized
  • Chrome vanadium shaft through-hardened to 50-53HrC
  • Patented tip and flute design removes dust more efficiently, up to 25% faster than other bits
  • Shot-peened, double-tempered finish reduces breakage
  • Hot isostatically pressed to extend life and resist breakage
warning sign WARNING
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:<br/> * lead from lead-based paints,<br/> * crystalline silica from bricks and cement and other masonry products, and<br/> * arsenic and chromium from chemically-treated lumber.<br/> Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Specifications

UNSPSC Code

27112700

Weight

0.73lb

Height

0.8in

Width

1in

Length

22in

Bit Length

16 in

Brand

Irwin

Category

Rotary Hammers

Cutting Diam [Nom]

5/8 in

Dia. [Nom]

5/8 in

Finish

Chrome

Flute Length

16 in

Height [Nom]

0.758 in

Length [Nom]

21 1/2 in

Overall Length [Nom]

18 in

Type

Drill Bit

Width [Nom]

1 1/2 in

Add to quick list
Compare
SEARCH ×